Stihl SR 200 Product Instruction Manual - Page 18

0002BA053 KN English Opening the threaded filler cap N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. Closing the threaded filler cap 002BA447 KN Information Before You Start NOTICE With the engine stopped and before starting, check the air intakes between the backplate and powerhead for blockages and clean if necessary. Control handle 1 2 3 1 Setting lever 2 Throttle trigger 3 Throttle trigger lockout Functions of setting lever 0002BA017 KN Throttle trigger limiter position Travel of throttle trigger can be limited in two stages: a b a 1/3 throttle b 2/3 throttle To disengage the travel limiter, N return the setting lever (1) to the run position F. N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. 002BA448 KN Run position F Engine runs or is ready to start. Throttle trigger (2) can be moved to any position. Stop position 0 Ignition is interrupted, engine stops. The setting lever (1) is not locked in this position. It springs back to the run position. The ignition is switched on again. 16 SR 200