Stihl SR 200 Product Instruction Manual - Page 26

English After Finishing Work If strainer is dirty: Storing the Machine N Close the valve lever. N Shut off the engine - see "Starting / Stopping the Engine". Draining the Solution Container N Store the machine in a dry, high or locked location sheltered from frost - out of the reach of children and other unauthorized persons. For periods of 3 months or longer 2431BA015 KN 1 N Turn metering knob (1) to 6. N Open the valve lever and drain remaining solution into a suitable container. Cleaning the Solution Container N Rinse and clean the solution container and hose system with clear water. N Dispose of remaining spray solution and rinsing liquid in accordance with local environmental requirements - follow maker's instructions. N Allow the unit to dry with the cap removed. 2431BA014 KN N Insert a suitable tool (e.g. screwdriver) in the two recesses (arrows) to loosen the strainer (2). N Pull the strainer (2) upward and out of the solution container. 2 N Clean the strainer (2) with clear water and a brush. 0002BA045 KN N Drain and clean the fuel tank in a well ventilated area. N Dispose of fuel properly in accordance with local environmental requirements. N Run the engine until the carburetor is dry - this helps prevent the carburetor diaphragms sticking together. N Thoroughly clean the machine - pay special attention to the cylinder fins and air filter. N Do not expose the container to direct sunlight for unnecessarily long periods. UV rays can make the container material brittle, which could result in leaks or breakage. 24 SR 200