Stihl SR 200 Product Instruction Manual - Page 30
Engine Running Behavior, Rewind Starter, Inspections and Maintenance, by Dealer
View all Stihl SR 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English Engine Running Behavior If engine running behavior is unsatisfactory even though the air filter is clean and the carburetor is properly adjusted, the cause may be the muffler. Have the muffler checked for contamination (carbonization) by your servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. Rewind Starter To help prolong the wear life of the starter rope, observe the following points: N Pull the starter rope only in the direction specified. N Do not pull the rope over the edge of the guide bushing. N Do not pull out the rope more than specified. N Do not allow the starter grip to snap back, guide it back into the housing slowly - see chapter on "Starting / Stopping the Engine." Have a damaged starter rope replaced by your dealer before it breaks completely. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. Inspections and Maintenance by Dealer Spark Arrestor in Muffler and Spacer N If the engine is down on power, have the spark arrestor in the muffler checked. N Check spacer for damage. N Have damaged spacer replaced immediately. 2431BA025 KN 28 SR 200