Stihl TS 700 Instruction Manual - Page 46

English N Remove screws (3) N Remove filter housing (4) 6 5 N Pull main filter (5) out of the filter housing N Set choke lever to c N Remove the auxiliary filter (6) from filter base - ensuring that dirt does not enter the intake area N Clean the filter area N Remount main filter and new auxiliary filter with the remaining filter components N Refit filter cover N Tighten down the locking screw Always use original STIHL air filters. The high quality of these parts will ensure trouble free operation, a long service life for the engine and extremely long filter life. 376BA074 KN Engine Management Exhaust emissions are controlled by the design of the engine and components (e.g. carburation, ignition, timing and valve or port timing). Adjusting the Carburetor Basic information The ignition system of this cut-off machine is equipped with an electronic maximum speed limiter. The maximum speed cannot be increased beyond a specified limit. The carburetor is equipped with a factory-installed standard setting. The carburetor has been adjusted for optimum performance and fuel efficiency in all operating states. Preparing the machine N Switching off the engine N Check the air filter - clean or replace it if necessary N Check the spark arresting screen in the muffler (present only in some countries) - clean or replace it if necessary 44 TS 700, TS 800