Stihl TS 700 Instruction Manual - Page 57
Specifications
View all Stihl TS 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours CARB The Emission Compliance Period used on the CARB-Air Index Label indicates the terms: Extended = 300 hours Intermediate = 125 hours Moderate = 50 hours Engine STIHL single cylinder two-stroke engine TS 700 Displacement: Cylinder bore: Piston stroke: 6.0 cu. in. (98.5 cm3) 2.2 in. (56 mm) 1.57 in. (40 mm) Engine power accord- 6.7 hp (5.0 kW) ing to ISO 7293: at 9300 rpm Idle speed: 2200 rpm Max. spindle speed: 5350 rpm TS 800 Displacement: 6.0 cu. in. (98.5 cm3) Cylinder bore: 2.2 in. (56 mm) Piston stroke: 1.57 in. (40 mm) Engine power accord- 6.7 hp (5.0 kW) ing to ISO 7293: at 9300 rpm Idle speed: 2200 rpm Max. spindle speed: 4600 rpm Ignition system Electronic magneto ignition Spark plug (suppressed): Electrode gap: Bosch WSR 6 F, NGK BPMR 7 A 0.02 in. (0.5 mm) Fuel system All-position diaphragm carburetor with integral fuel pump Fuel tank capacity: 40.6 oz (1.2 l) Air filter Main filter (paper filter) and flocked wire mesh auxiliary filter Weight English without fuel, without abrasive wheel, with water attachment TS 700: 25.6 lbs. (11.6 kg) TS 800: 28.0 lbs (12.7 kg) Abrasive wheels The quoted maximum permissible operating speed of the abrasive wheel must be greater than or equal to the maximum spindle speed of the cut-off machine used. Abrasive wheels (TS 700) Outside diameter: Max. thickness: Bore diameter/spindle diameter: Tightening torque: 14 in. (350 mm) 0.189 in. (4.8 mm) 0.787 in. (20 mm) 22 lbf ft (30 Nm) Composite resin abrasive wheels Minimum outside diameter of 4.06 in. thrust washers: (103 mm) Max. depth of cut: 4.9 in. (125 mm) Diamond abrasive wheels Minimum outside diameter of 4.06 in. thrust washers: (103 mm) Max. depth of cut: 4.9 in. (125 mm) TS 700, TS 800 55