Sub-Zero BI-36S Sub-Zero Design Guide - Page 32
Flush Inset Application - bi 36r o
View all Sub-Zero BI-36S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Built-In Refrigeration 32 Dual installation-flush inset application. Dual Installation Panel Requirements MAX WEIGHT PER PANEL BI-36R, BI-36RG and BI-36F All Other Models Dual Wide Grille Panel MIN PANEL THICKNESS Flush Inset Panels 75 lbs (34 kg) 50 lbs (23 kg) 26 lbs (12 kg) 5/8" (16) Dual Installation FLUSH INSET APPLICATION Installing two built-in models side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your authorized Sub-Zero dealer. Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip. Refer to the full-scale template on page 43. Illustration A is the only application that will accommodate the dual wide grille. IMPORTANT NOTE: The application shown in illustration A can only be achieved by installing dual flush inset panels. Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this application a dual installation accessory kit is also required. Dual flush inset panels and dual installation kits are available through your authorized Sub-Zero dealer. Refer to pages 34-35 for dual flush inset panel specifications and page 36 for information on dual installation kits. WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED Illus. A Illus. B Illus. C