Sub-Zero BI-36S Sub-Zero Design Guide - Page 61
Integrated Refrigeration, Dual Installations, Cabinetry Applications
View all Sub-Zero BI-36S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Integrated Refrigeration 61 subzero.com/specs Cabinetry Applications The illustrations below show typical applications of framed and frameless cabinetry. Refer to the full-scale templates at the end of this section for specifics on door openings. CABINET INTEGRATED UNIT CABINET INTEGRATED UNIT DOOR 1/8" (3) REVEAL PANEL FINISHED OPENING DOOR 1/8" (3) REVEAL PANEL FINISHED OPENING Framed-full overlay. Framed-standard overlay. Dual Installations Two integrated units may be placed side by side in a dual installation. Depending on the models specified, opening widths will be 54" (1372), 63" (1600) or 72" (1829). Panel width dimensions will vary slightly from single installations. Refer to the chart below for typical panel dimensions. The dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible with adjustments to panel dimensions. Typical Panel Dimensions COLUMN MODELS Door 27" (686) MODELS Door Top Drawer Bottom Drawer 36" (914) MODELS Door Top Drawer Bottom Drawer W 2613/16" (681) W 2613/16" (681) 2613/16" (681) 2613/16" (681) W 3513/16" (910) 3513/16" (910) 3513/16" (910) H 767/8" (1953) H 453/8" (1153) 139/16" (345) 1611/16" (424) H 453/8" (1153) 139/16" (345) 1611/16" (424) CABINET UNIT CABINET INTEGRATED UNIT DOOR 1/8" (3) REVEAL PANEL FINISHED OPENING DOOR 1/8" (3) REVEAL PANEL FINISHED OPENING Framed-beaded inset. Frameless cabinetry. A dual installation kit is required for installations with 2" (51) or less space between the units. Dual installation kits are available through your authorized Sub-Zero dealer. IMPORTANT NOTE: If a 27" (686) unit is installed next to a 36" (914) tall unit, the decorative front panels will align, however, the face frames will not. This is only apparent when both doors are open at the same time. Due to a more robust hinge on 36" (914) units, the face frame was reconfigured to maintain a consistent overall panel height. Refer to the illustration below. 736TCI Face frame alignment.