Sub-Zero BI-42UFD Built-In Design Guide - Page 27
Dual Installation - over and under with french door
View all Sub-Zero BI-42UFD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BUILT-IN REFRIGERATION Dual Installation If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between units. A custom filler strip is required when installing two French door or side-by-side models. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below. Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For questions regarding the installation, call Sub‑Zero customer care at 800-222-7820. For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 20-23. Panel dimensions and offsets for dual flush inset installations are listed on the following pages. WITHOUT FILLER STRIP Opposite hinges. FILLER STRIP Same side hinges. subzero.com/specs | 27