Symphonic CWR20V4 Owner's Manual - Page 99

Before you start Connections Getting started Recording Others Troubleshooting (cont'd) Symptom Remote control The remote control does not function. Others The unit does not operate properly. The disc tray does not open when you press OPEN/CLOSE A button. "Repairing" appears on the display. Repairing Remedy • Batteries are weak. • There are obstacles between the remote control and the unit. • The remote control is far from the unit. • There are no batteries in the remote control. • Turn on the unit. • The remote control is not pointed at the remote sensor on the unit. • Press the DVD or VCR button, whichever you need.Then, try again. • Check if a cassette tape is in this unit. • When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again. • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the unit is adding disc data to the disc. • If there is a power failure or unplugging during recording, finalizing, formatting or editing, a Repairing process will begin automatically just after turning the DVD recorder on again. It may take several minutes up to about four hours. Playing discs Editing Changing the SETUP menu VCR functions Others Français Error message Disc Error --- Please eject the disc. --Playback feature may not be available on this Disc. Region Error --- Please eject the disc. --Playback is not authorized in your region. Parental Lock On --- Please eject the disc. --The current selected parental level Prohibits playback. Recording Error This program is not allowed to be recorded. Recording Error This program is not recordable in Video mode. Recording Error Can not record on this disc. Recording Error This program is not allowed to be recorded on this disc. Recording Error This disc is protected and not recordable. Cause Unplayable disc is inserted in the unit. Solution Insert the standardized disc which bear the marks on page 43. Playback is not authorized in the region of the DVD-Video disc which you inserted in the unit. Insert the DVD-Video disc with region codes 1 or ALL. The current selected parental level in the SETUP Menu prohibits playback. Check the "Parental Lock" setting (pages 92-93). The recording function encountered You cannot record copy prohibited the copy prohibited program. programs. You are trying to record the copyonce program onto the DVD-RW disc in Video mode. You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. You are trying to record the copyonce program onto the DVD-RW disc which is not compatible with CPRM. You are trying to record on to the protected disc which is set in the Disc Setting Menu. Set "DVD-RW Recording Format" to "VR mode" (page 28). Insert the recordable disc, and ensure the disc status satisfies the recording requirements (pages 26-42). Insert the DVD-RW disc (ver.1.1 compatible with CPRM). Release the disc protect setting in the Disc Setting menu (page 42). 99