Symphonic SSC199V Owner's Manual - Page 27
Automatic, Tinier, Recording
View all Symphonic SSC199V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
TIMER AUTOMATIC TINIER RECORDING You may set the TV/VCR to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. And press the F.FWD/Ii. button. • If you have not yet set the clock, "MANUAL CLOCK SET" appears. If so, follow stops [3] to [8] on page 15. Then set the timer recording. -MENU- Ix TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF) ZERO RETURN TIME SEARCH INDEX SEARCH In the example below, the timer is being set to record: DATE: MAY 6th, 1999 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP Make sure ... • Use the remote control for this procedure. 2 Select your desired program position (1-8) Press the PLAY/A or STOP/V button to select the desired program position. Then, press the F.FWD/IIP. button. - TIMER PROGRAMMING - CH DATE BEGIN END ▪ TTT T • If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. • Clock must be set to the correct time and date before setting the timer. • TV/VCR power must be turn on to program it. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) 3 Set the channel number Press the PLAY/A or STOP/V button until the desired channel number appears. (Example: CH61) - TIMER PROGRAMMING - CH DATE BEGIN END • - • Then, press the F.FWD/Iii- button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. • The channel you want to record is properly set in advance. (See page 13.) Avoid over lap of programs ... There is a chance that a program will not be recorded. when programs overlap; • The program with an earlier start has priority. • Once the earliest program finishes, the overlapping programs will begin recording in sequence. • The illustration below demonstrates the sequence of recordings. Program 1 10:00AM - 11:00AM Program 2 9:00AM - 10:00AM Program 3 9:30AM - 12:00PM Record/4 Sequence Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM , 9:00AM 10:00AM 11:00AM 12:00PM 'RecordingperiodIs SHADED 1 Select "TIMER PROGRAMMING" Press the MENU button. Confirm "TIMER PROGRAMMING" is pointed by pressing the PLAY/A button. 4 Select once, every day or weekly recording For once recording : Press the PLAY/A (up) button until the desired date appears. (Example: "5/06" for May 6th). Then, press the F.FWD/1/ button. -TIMER PROGRAMMING - CH DATE BEGIN END IN* 906 THU =!-- t- - - • For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) Press the STOP/V (down) - TIMER PROGRAMMING - CH DATE BEGIN END button until "EVRY DAY" appears. • EVRY DAY PP-- -40 f-1 St - Then, press the F.FWD/11- button. For weekly recording : To record a TV program at the same time on the same channel every week. (Example: every Monday) Press the STOP/V (down) button until "EVRY" and your desired day of the week appear together. Then, press the F.FWD/110button. - TIMER PROGRAMMING - CH DATE BEGIN END It --- -- EVRY MON GA- -At t --I -V -- - 27 - EN 9F07