Symphonic ST191B Owner's Manual - Page 12

THE FOLLOWING STEPS CAN BE DONE WITH THE REMOTE CONTROL OR MANUALLY. Press AUTO MEMO button for more than one second on the remote control unit. The light red channel number on the screen will begin to advance from 2 (1 on CATV ) forward. The tuner will then begin to search for all available stations in your area. 2 AUTO MEMO Now, all the channels you receive in your area are stored in memory. The channel number will be displayed in light blue. Note: You may have channels that are still displayed in light red. These channels (stations) are not available in your area. To erase channels still in light red. Stations not available in your area. Proceed to steps 5 and 6 below. 5 Press SKIP/SEARCH button on the remote control until the word "SKIP" is displayed on the screen. I SKIP/ SEARCH SKIP I 6 Press CHANNEL UP(or DOWN) Button. Now all channels in light red are erased. MEMORIZING INDIVIDUAL CHANNEL 1 Press SKIP/SEARCH button until the word "SEARCH" is displayed on the screen. SKIP/ SEARCH ( ) SEARCH 2 Enter the desired channel using the number buttons on the remote control or CHANNEL UP (or DOWN) button. Selected channel is displayed in light red. C3 E±1 E±3 Kt3 32 CZ) 6 6 6 6 6 3 Press ADD/CLEAR button. Displayed channel number will change to light blue and is now in memory. 32 ADO/ CLEAR Repeat steps [2] and [3] for each channel you choose to memorize. 4 Press SKIP/SEARCH button until the word "SKIP" is displayed on the screen. SKIP/ SEARCH V CHANNEL A ( ) 32 \._ SKIP Tuner stops at the programed channel. - 12 - EN