Symphonic ST191B Owner's Manual - Page 14
Operations
![]() |
View all Symphonic ST191B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
OPERATIONS 1 Press POWER button to "ON". Channel "2" displays in light red CONTRAST 1 Press PICTURE SELECT button repeatedly until "CONTRAST" is displayed. 2 POWER 2 Select the desired channel with CHANNEL UP/ DOWN buttons or 10-keys on the remote control unit. SELECT CONTRAST 0000000001000 2 To increase the contrast, push the PICTURE CONTROL "+" button. To decrease contrast, push the PICTURE CONTROL "-" button. 32 V CHANNEL A 3 Adjust the volume to desired listening level using VOLUME UP and DOWN buttons. V VOLUME A ( VOLUME 0001000000000 - CONTROL + CONTRAST 0000000100000 BRIGHTNESS 1 Press PICTURE SELECT button repeatedly until "BRIGHTNESS" is displayed. 4 Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENTS") SELECT BRIGHTNESS 0000001000000 PICTURE ADJUSTMENTS Satisfactory results will usually be obtained with the control set at the factory-preset levels. If any adjustments are necessary, adjust the required controls as follows. These steps can be done manually with the Remote Control. Note: For normal use, set to center position. 2 To increase brightness, push PICTURE CONTROL "+" button. To decrease brightness, push the PICTURE CONTROL "-" button. - CONTROL + BRIGHTNESS 0000000010000 - 14 - EN
![](/manual_guide/products/symphonic-st191b-owners-manual-aa6fc8b/14.png)