Symphonic TVCR19F1 Owner's Manual - Page 10
Preparation
View all Symphonic TVCR19F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
PREPARATION FOR USE CABLE CONNECTIONS VHF/UHT SEPARATE ANTENNAS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (not supplied) is detachable. Push the stem of the antenna into the hole which is located on the upper back cabinet of the unit. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT. terminal of the TVNCR as shown in the diagram below. For the best reception, extend the VHF/UHF Rod Antenna fully and adjust its position. (Avoid handling the top section when making adjustments.) In some areas it will be necessary to use an outdoor antenna. VHF Antenna UHF Antenna MIN MOM MIN VHF/UHF • I Combiner (Not supplied) VHF/UHF Antenna Rod Antenna (Not supplied) ANT.0 ANN IF* Flat twin-lead cable CABLE WITHOUT CONVERTER./ DESCRAMBLER BOX ANT. O Use this connection if your cable system connects directly to your TVNCR without a converter box. With this connection you, 1) can use your TV/VCR Remote Control to select channels, 2) program one or more unscrambled channels for Automatic Timer Recording. NOTE : Before plugging the Rod antenna into antenna terminal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal. Bent pin From Cable System 75-ohm Coaxial Cable (not supplied) Cable Plug (Needs to be straightened) (Straight pin) ANT.© 00111111 InIInUuIuIImIII 11•111•11 IN M MPH WNW Halle MINIM C - 10 - EN 6A31