Symphonic TVCR19F1 Owner's Manual - Page 20

SEARCH Make sure ... • You must use the remote control for the following steps. • Power must be turned on. • Insert a tape. COUNTER MEMORY TIME SEARCH This feature can be used to memorize a beginning point that you want to review. And you can search it easily by rewinding or fast forwarding. NOTES: • If the All Repeat or Blank Repeat is set to [ON], the Counter Memory function does not work. • If the counter is not displayed, the Counter Memory will not be activated. Press C.MEMORY button so that the counter appears on the display. • 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review. 2 Reset the counter to 0:00:00 Press C.RESET button repeatedly. 3 Select the Counter Memory mode Press C.MEMORY button so that "MEMORY" appears on the display. ME MORY 000 00 The Time Search function makes it possible to quickly advance the tape to your desired position from any position by entering the exact amount of playback time of the part that you want to skip. NOTES: • Time Search is set up to 9 hours 50 minutes (9:50) by 10 minutes at a time . • This function is not operative in recording mode. • Counter Memory function is not operative in this mode. • This function is not operative when a cassette tape is not inserted in the TV/VCR. In the example below: To watch a program after 2 hour 50 minutes from present position to forward direction. 1 Select "TIME SEARCH" mode Press TIME SEARCH button OR Press MENU button repeatedly to point to "TIME SEARCH". Then, press SELECT button. -MENUNUE", PROSIRAMINNO MENNE CONTRCt SETTING CLOCK CHANNEL SET UP USERS SET UP al ttlat.77411 IP TIME SE II 4 Begin recording or playback Press RECORD or PLAY button. Press STOP button when recording or playback is completed. 2 Enter your desired time Press CH A or V button repeatedly until your desired time is appeared. (Example: "2:50" for 2 hours 50 minutes) T.44 MO. es, Ot. En 5 To activate the Counter Memory Press REWIND (or F.FWD) button. The tape will automatically stop when the counter returns to 0:00:00. TO CANCEL THE COUNTER MEMORY First press C.MEMORY to display the counter on the TVNCR screen. Then press C.MEMORY continuously until "COUNT" appears. COJNI acoao 3 Begin Time Search Press REWIND or F.FWD button. The tape will move to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TO CANCEL THE TIME SEARCH Press STOP/EJECT button on the TVNCR or the remote control. This will delete the selected time. - 20 - E 6A