Symphonic TVCR19F1 Owner's Manual - Page 21
Recording, Normal, Skipping, Materials, During
View all Symphonic TVCR19F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
RECORDING Make sure ... • Power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NORMAL RECORDING You can only watch the same TV program that is being recorded. I Select the channel to be recorded P.ress number buttons on the remote control or the CH V or A button. CH 10 " 2 Select the tape speed Press SPEED button to select the desired tape speed (SP/LP/ SLP). 3 Begin recording Press RECORD button. The REC indicator flashes. SKIPPING SOME MATERIALS DURING RECORDING Press PAUSE/STILL button to temporarily stop recording. The REC indicator blinks. Press PAUSE/STILL or RECORD button to resume recording. • NOTES: • To prevent tape damage, after five minutes, the TVNCR will automatically return to the Recording mode. • When in the Pause/Still mode, a display showing 5 "■" marks will appear on the screen. Each "■" mark represents one minute of Pause time. You may refer to this display for remaining pause time available. • If "CLOSED CAPTION [ON]" is selected from the "CLOSED CAPTION SETUP" menu, the On Screen Display will appear for 5 seconds, then disappear. If you want to check the remaining pause time available using the On Screen Display, press SELECT button. The On Screen Display will appear for 5 seconds. 4 Stop recording Press STOP button when recording is completed. -21 - EN 6A31