Symphonic WF802 Owner's Manual - Page 20

RECORDING FUNCTION VCR VCR It may be UNLAWFUL to record copyrighted material without the consent of the copyright owner. Accidental Erasure Prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with cellophane tape. Record safety tab Before recording, make sure: ¡The desired channel is selected by pressing the Number buttons on the remote control or the CHANNEL buttons (o/p). (If you connected the DVD/VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 14, set the DVD/VCR to channel 3 or 4 i.e. the same channel as the CH3 or CH4 switch on the back of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box. In this case, you can ONLY record and view the SAME channel.) ¡There is a tape with a safety tab into the DVD/VCR. ¡The desired recording speed is selected in SP (standard play) or SLP (super long play) mode by pressing the SPEED button on the remote control. Tape Speed Type of tape SP mode SLP mode T60 1 hour 3 hours Recording/Playback Time T120 T160 2 hours 2-2/3 hours 6 hours 8 hours ¡TV STEREO or SAP is selected. VIEWING AND RECORDING THE SAME PROGRAM VCR 1 Begin the recording by pressing the RECORD button. The REC/OTR Light comes on. ¡To temporarily stop recording or to resume it, press the PAUSE button. After the DVD/VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. 2 Press the STOP button when the recording is completed. ¡If a tape ends during recording, the VCR will automati- cally stop, rewind, and eject the tape. OTR (One Touch Recording) VCR This feature allows you to set the recording length simply by pressing the REC/OTR button on the DVD/VCR. 3 Press the REC/OTR button to begin OTR. The REC/OTR Light comes on. Change the recording length by pressing the REC/OTR button repeatedly. REC OTR(0:30) (Normal recording) OTR(1:00)..... ¡If a tape ends during OTR, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER SET light blinks. (If the DVD power is off, the DVD/VCR will become STANDBY status). ¡When OTR is finished , the VCR turns off automatically. To use the VCR again, press the TIMER SET button on the DVD/VCR. TIMER RECORDING VCR You may set the DVD/VCR to start recording while you are away. You can set seven programs to record on specific days, daily or weekly within a 1 year period. If you have not yet set the clock, "CLOCK SET" appears. If so, follow the steps [3] and [4] in "CLOCK SET" section on page 18. Then, set the timer recording. 1 Insert a tape with its safety tab intact. 2 Press the MENU button. 3 Select "TIMER PROGRAMMING" by pressing the PLAY or the STOP button. Then, press the F.FWD button. The set up screen is displayed. TIMER PROGRAMMING PROG. 1234567 DATE - START TIME END TIME CHANNEL REC SPEED 4 Set the timer. ¡If you make mistakes, press the REW button repeatedly to go back to the item you want to correct. ¡If you press the REW button after step 7), all the information you've just entered for that program number will be cleared. 1) Set the program number (1-7) A program number which is not allocated flashes. Press the PLAY button or the PROGRAM NUMBER 4 DATE - - / - - START TIME END TIME CHANNEL - - REC SPEED - - STOP button repeatedly for the desired program number. Then, press the F.FWD button. 2) Set the frequency of the recording Press the PLAY button or the STOP button to select the desired frequency from PROGRAM NUMBER ONCE 4 ONCE, DAILY, or WEEKLY recording. DAILY WEEKLY Then, press the F.FWD button. 3) Set the date First, press the PLAY button or the STOP button for the month. Then, press the F.FWD button. Next, press the PLAY button or the ONE TIME PROGRAM PROGRAM NUMBER 4 DATE --/-- -- START TIME END TIME CHANNEL - - REC SPEED - - STOP button for the day. Then, press the F.FWD button. OTR(8:00) OTR(7:30) - 20 - EN 1L25