Synology DS220j Hardware Installation Guide - Page 4
Synology DS220j at a Glance, Before You Start
View all Synology DS220j manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Synology DS220j at a Glance No. Article Name 1 Status Indicator 2 LAN Indicator 3 Disk Indicator 4 Power Button 5 Fan 6 LAN Port 7 USB 3.0 Port 8 Reset Button 9 Kensington Security Slot 10 Power Port Location Description Displays the status of the system. For more information, see "LED Indicator Table". Front Panel Displays the status of the network connection. For more information, see "LED Indicator Table". Displays the status of the installed drive. For more information, see "LED Indicator Table". 1. Press to power on the Synology NAS. 2. To power off the Synology NAS, press and hold until you hear a beep sound and the Power LED starts blinking. Disposes of excess heat and cools the system. If the fan malfunctions, the Synology NAS will emit a beeping sound. Connect a network cable here. Connect external hard drives or other USB devices to the Synology NAS here. Back Panel 1. Press and hold until you hear a beep sound to restore the default IP address, DNS server, and password for the admin account. 2. Press and hold until you hear a beep sound, then press and hold again until you hear three beep sounds to return the Synology NAS to "Not Installed" status so that DiskStation Manager (DSM) can be reinstalled. Attach a Kensington security lock here. Connect the AC power adapter here. 4 Chapter 1: Before You Start