TASCAM CD-RW901 Owners Manual - Page 10

2 − Features of the CD-RW901 Front panel 1 2 34 56 7 8 9 0q w e rty u i op a sdf g hj k 1 POWER switch The power switch is used to switch the unit on and off. 2 Disc tray Discs should be placed label side upwards in the disc tray. When a disc is loaded into the unit, the display shows TOC Reading for a short period while the unit determines the contents of the disc. 3 MENU key Use this key to call up the menu options (see "Operation basics" on page 16). 4 OPEN/CLOSE key Use this key to open and close the disc tray. The display shows Open when the tray is opening and Close when the tray is closing. 5 REPEAT key Use this key to set the repeat playback mode on and off. 6 ESCAPE key When in a menu mode, this key cancels the menu item selected. 7 DISPLAY key Use this key to see the current disc title when the disc is stopped. When the disc is playing or in ready mode, press this key to see the current track title. 8 TIME key Use this key to cycle through the time modes shown on the display (see "Time display switching" on page 20). 9 Display The display is used to show the current status of the unit, as well as the current menu settings. 0 TIMER switch (PLAY, OFF) Using this key switches Timer play on and off. See "Timer playback" on page 21 for details. q INPUT (L,R) controls Use these concentric controls to adjust the level of the analog audio signals received at the ANALOG IN jacks. w PHONES jack and the level control Use a standard pair of stereo headphones, equipped with a 1/4-inch plug, with this jack. Adjust the volume from the jack with the level control (turn clockwise for higher volume). e PITCH control Push this control to set the Pitch Control on and off. Turning this control adjusts the value within ±16.0%. r AUTO CUE key Use this key to set Auto Cue on and off. t AUTO READY key Use this key to set Auto Ready on and off. y CALL key Pressing this key locates a track to the last point where playback was previously started in playback ready mode, and puts the unit into playback ready mode. During recording, pressing this key assigns an index number manually. u MULTI JOG dial Use this dial to select tracks for playback, to set parameter values. In addition, pushing the dial acts like an ENTER key, i.e. the currently-displayed value or setting is confirmed. i FINALIZE/INS key Use this key to finalize recordable discs (see "Finalizing" on page 31). When in playback or playback ready mode, pressing this key shows the disc's ISRC code on the display. It also acts like a space key when entering TEXT data (see "Title input operation" on page 33). o ERASE/DEL key Use this key (with CD-RW discs only) to erase tracks, or a whole disc, or to refresh a "bad" disc, or to unfinalize a finalized disc (see 10 TASCAM CD-RW901