TASCAM CD-RW901 Owners Manual - Page 36

9 − Reference and specifications Error messages Message Can't Rec! Disc Error! Disc Full! Text Full! Sure? Text! Drive Error! D-IN UNLOCK! Not Audio! Erase Error! Not Fs44.1k! PGM Empty! PGM Full! Can't Edit! Can't sel! Rec Error! No DIR! Decode Err! Format Err! EXT CLK Err! Details / response Cannot record. Either erase the contents of the disc (for a CD-RW), or use a different recordable disc. The disc has malfunctioned. Please replace with a new disc. No recording time remaining, or no recordable track is left on the disc. No space to input the letters. The text data is not written on the disc yet. Open the tray to cancel the text you entered or perform the finalize operation to write the data to the disc. There is a problem in the drive. The digital input is not connected. Turn on the power of the equipment connected to DIGITAL IN. There is no audio signal from DIGITAL IN. An error occurred while erasing. The sampling frequency of the digital input is not 44.1 kHz. Please turn the SRC on. There is no program. No new programs can be created. Editing cannot be performed due to operational restrictions. Menu selection cannot be performed due to selection restrictions. There was an error during recording. Please re-record. There is no directory that contains a file. The MP3 file cannot be played back. The disc is in a format that the CD-RW901 cannot read. Can not synchronize with the digital input clock from the selected source. Check the connection with the source unit. Messages during operations Message Blank Disc Complete Now OPC* Disc Repair PMA Writing* TOC reading Incomplete! 48k Fs Adj Statement A blank recordable disc has been inserted. An operation such as finalize or erase has been successfully completed. Calibration is being performed to operate recording properly. The disc is being repaired, and this operation will take a long time. Please do not turn off the power of the CD-RW901 until it finishes. The recorded content is being written to the disc. The table of contents data is being read. ISRC or RID codes have not been read by the unit, or there is no code on the disc. The 48k Fs adjustment function is on. *OPC=Optium power Control *PMA=Program memory Area 36 TASCAM CD-RW901