TASCAM DA-6400 DA-6400dp Owners Manual Addendum V3.10 - Page 38

DA-6400/DA-6400dp SRC This turns the sample rate converter on/off for each signal line off automatically and the INFO indicator will light red. In this situation, press the INFO button to open the following alert message. Once this has been confirmed, it will disappear. Options: OFF (default), ON NOTE i SRC cannot be set to ON for the signal line selected as the master clock. In this case, the following pop-up window appea i The INFO indicator lights red when an error has occurred with the IF-AE16 input signal. In this situation, press the INFO button to show the following information. Note that even if there is an error with the input signal, it will not mute. i If an IF-AE16 is installed, depending on the main unit SRC item setting and clock master setting, an error described as "SRC for the IF-AE16 signal line selected as the CLOCK MASTER is ON" could occur. In this case, the SRC item for that signal line will be turned Unlocked: The input signal is not synchronized with the main unit. no signal: There is no input signal. not audio: The input signal Cbit data is "not audio". Dual Line: The input signal Cbit data is "Dual Line". Function added to synchronize with SMPTE timecode and play the current take A function has been added to play the current take synchronized with the SMPTE timecode input through the TIMECODE IN connector on the back of the unit. A TC SYNC page has been added to the menu for this function. Setting timecode synchronized playback Use the TC SYNC page to make timecode synchronized playback settings. i When "TC CHASE MODE" is "ALWAYS ON", it will not become "OFF" under the above conditions. However, synchronized playback will not be possible under the following conditions. • When in Playlist Mode TC CHASE OFFSET A timecode offset can be set for the input timecode. TC CHASE MODE Turn timecode synchronized operation on/off. Options: OFF (default), ON , ALWAYS ON NOTE i "ALWAYS ON" option added in V3.10. i You can also press the 9 [CHASE] button while pressing and holding the SHIFT button on the front of the unit to turn it on/off. i When "TC CHASE MODE" is "ON", it will become "OFF" under the following conditions. • When the power is turned off • When media is replaced • When Playlist Mode is activated 38 TASCAM DA-6400/DA-6400dp The setting range is from -23:59:59.29 to +23:59:59.29. Function (default) TC RECHASE MODE This turns on/off the resynchronization function for when synchronization becomes inaccurate during timecode synchronized playback. Options: OFF (default), ON When set to OFF, after being synchronized once the input timecode is ignored and the unit operates in free run mode. When set to ON, rechasing will start when the synchronization inaccuracy exceeds the threshold level set on the TC RECHASE THRESH screen.