TASCAM DA-6400 DA-6400dp Owners Manual Addendum V3.10 - Page 41
Setting output signal routing, EXIT [PEAK CLEAR], MULTI JOG, SLOT1, Option
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
DA-6400/DA-6400dp When the confirmation pop-up message is open, press the MULTI JOG dial to change to setting the multiple selected channels at the same time, and reopen the INPUT ROUTING setting list. When the confirmation pop-up message is open, press the EXIT [PEAK CLEAR] button to close the message. Setting output signal routing Follow these steps to set output signal routing. 1. Open the ROUTING page and select the OUTPUT ROUTING item. Then, press the MULTI JOG dial to open the OUTPUT ROUTING settings list. 4. Operations differ according to the selected EDIT MODE. i Individual selected The name of the output connector selected in step 1 appears to the left of the selection area. Turn the MULTI JOG dial to select an output signal. Options: CHANNEL 01 - CHANNEL 64 (64 options) Press the MULTI JOG dial to confirm the setting value and reopen the OUTPUT ROUTING setting list. i 8ch BLOCK selected OUTPUT ROUTING settings list NOTE When an interface card with less than 64 output signal channels is installed, the names of unavailable output connectors appear gray. For example, if an IF-AE16 card with 16 I/O channels is installed in SLOT1, the SLOT1-17 OUT to SLOT1-64 OUT items will appear gray. An 8-channel block that includes the output connector selected in step 1 appears to the left of the selection area. Turn the MULTI JOG dial to select an output signal block. Options: C HANNEL 01-08, CHANNEL 09-16, CHANNEL 17-24, CHANNEL 25-32, CHANNEL 33-40, CHANNEL 41-48, CHANNEL 49-56, CHANNEL 57-64 (8 options) Press the MULTI JOG dial to confirm the setting value and reopen the OUTPUT ROUTING setting list. i BATCH SETUP selected 2. Turn the MULTI JOG dial to select the output connector you want to set, and press the MULTI JOG dial to open the OUTPUT ROUTING setting screen. OUTPUT ROUTING setting screen 3. Select the EDIT MODE item and set how setting values are changed. Press the MULTI JOG dial to confirm the EDIT MODE and move the cursor to the next item. You can also use the . and / buttons to move the cursor. Option Individual (default): Change settings for one channel at a time. 8ch BLOCK: Change settings for eight channels at a time. BATCH SETUP: Set a group of multiple channels to be changed at the same time. RANGE SELECT appears to the left of the selection area. Press the MULTI JOG or . and /buttons to move the blue cursor, and turn the MULTI JOG to set the following values. i Slot number and first and last numbers of the range of output connectors for which you want to change settings i First number of the channel you want to route Move the blue cursor to APPLY and press the MULTI JOG dial to open a pop-up confirmation message. When the confirmation pop-up message is open, press the MULTI JOG dial to change to setting the multiple selected channels at the same time, and reopen the OUTPUT ROUTING setting list. When the confirmation pop-up message is open, press the EXIT [PEAK CLEAR] button to close the message. TASCAM DA-6400/DA-6400dp 41