TASCAM DA-6400 DA-6400dp Owners Manual Addendum V3.00 - Page 11
New functions in firmware version 2.10, Cascade function support
View all TASCAM DA-6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
DA-6400/DA-6400dp Display of marks for theater play within the same take Marks for theater play within the same take are shown as follows on the Home Screen. Mark name $SKIPPLAY $SKIPPAUSE $SKIP Icon (white ;) (green ;) (green l) Inputting names of marks for theater play within the same take The names of these mark points can easily be input on the mark name editing screen using the same procedures as existing theater play mark points. New functions in firmware version 2.10 The following new functions have been added in firmware version 2.10. o A cascade function that allows simultaneous recording/playback operations on two units is now supported. o The INFORMATION screen now shows the cascade status. Cascade function support A cascade function is now supported. This allows simultaneous recording/playback operations with sample-precise synchronization on two units that are connected to the same network. Cascade operation of up to two units is possible with the following simultaneous recording/playback channel limits. o When the sampling frequency is 44.1/48 kHz, up to 64 channels on 2 units (128 total channels) o When the sampling frequency is 88.2/96 kHz, up to 32 channels on 2 units (64 total channels) Cascade function setup Use the CASCADE page added to the menu screen to make cascade function settings and check its status. CASCADE STATUS This shows the cascade status. Cascade status Cascade OFF Offline (No Network) Offline (Duplicate Slave) Offline (Duplicate Master) ERROR/ALERT classification --ERROR ERROR ERROR Comms Lost with Slave ALERT Offline (No Slaves) ALERT Offline (No Master) Syncing... Waiting... OK (N active) ERROR ERROR ERROR --- Contents The cascade function is off. Cascade operation is not possible because it is not connected to a network. Proper cascade operation is not possible because multiple units are set to the same cascade slave ID. Cascade operation is not possible because multiple units are set as the cascade master. The cascade master is no longer able to communicate to one of the cascade slaves. Cascade operation is not possible because no unit set to be a cascades slave could be found on the network. Cascade operation is not possible because no unit set to be the cascade master could be found on the network. Cascade synchronization is being prepared. The unit is waiting for cascade to be ready. Cascade synchronization is working properly for N number of units. TASCAM DA-6400/DA-6400dp 11