TASCAM DA-6400 DA-6400dp Owners Manual Addendum V3.00 - Page 41

When the confirmation pop-up message is open, press

the MULTI JOG dial to change to setting the multiple

selected channels at the same time, and reopen the

INPUT ROUTING

setting list.


the

EXIT [PEAK CLEAR]

button to close the message.

Setting output signal routing

Follow these steps to set output signal routing.

1.

Open the

ROUTING

page and select the

OUTPUT

ROUTING

item. Then, press the

MULTI JOG

dial to open the

OUTPUT ROUTING

settings list.

OUTPUT ROUTING

settings list

NOTE

When an interface card with less than 64 output signal

channels is installed, the names of unavailable output

connectors appear gray.

For example, if an IF-AE16 card with 16 I/O channels is

installed in

SLOT1

, the

SLOT1-17

OUT to

SLOT1-64

OUT

items will appear gray.

2.

Turn the

MULTI JOG

dial to select the output connector

you want to set, and press the

MULTI JOG

dial to open the

OUTPUT ROUTING

setting screen.

OUTPUT ROUTING

setting screen

3.

Select the

EDIT MODE

item and set how setting values are

changed.

Press the

MULTI JOG

dial to confirm the

EDIT MODE

and

move the cursor to the next item. You can also use the

.

and

/

buttons to move the cursor.

Option

Individual

(default): Change settings for one channel

at a time.

8ch BLOCK

: Change settings for eight channels at a time.

BATCH SETUP

: Set a group of multiple channels to be

changed at the same time.

4.

Operations differ according to the selected

EDIT MODE

.

i

Individual

selected

The name of the output connector selected in step

1

appears to the left of the selection area.

Turn the

MULTI JOG

dial to select an output signal.

Options:

CHANNEL 01

–

CHANNEL 64

(64 options)

Press the

MULTI JOG

dial to confirm the setting value and

reopen the

OUTPUT ROUTING

setting list.

i

8ch BLOCK

selected

An 8-channel block that includes the output connector

selected in step

1


Turn the

MULTI JOG

dial to select an output signal block.

Options:

CHANNEL 01-08

,

CHANNEL 09-16

,

CHANNEL 17-24

,

CHANNEL 25-32

,

CHANNEL 33-40

,

CHANNEL 41-48

,

CHANNEL 49-56

,

CHANNEL 57-64

(8 options)

Press the

MULTI JOG

dial to confirm the setting value and

reopen the

OUTPUT ROUTING

setting list.

i

BATCH SETUP

selected

RANGE SELECT


Press the

MULTI JOG

or

.

and

/

buttons to move

the blue cursor, and turn the

MULTI JOG

to set the

following values.

i

Slot number and first and last numbers of the range

of output connectors for which you want to change

settings

i

First number of the channel you want to route

Move the blue cursor to

APPLY

and press the

MULTI JOG

dial to open a pop-up confirmation message.


the

MULTI JOG

dial to change to setting the multiple

selected channels at the same time, and reopen the

OUTPUT ROUTING

setting list.


the

EXIT [PEAK CLEAR]

button to close the message.

TASCAM

DA-6400/DA-6400dp

41

DA-6400/DA-6400dp

Section	Page
New functions in firmware version 3.00	2
Time counter dimmer function added	2
Function added to show playback setting status of AUTO READY and theater play functions on the Home Screen	3
Lock function added to prevent mark setting	4
Function added to turn on/off pop-up message display when setting marks and mark setting is locked	4
ABS time display mode added	5
Entry number and time counter display and time mode switching function added to playlist entry editing (ADJUST) screen	6
Mark name that matches current time shown on playlist entry editing (ADJUST) screen	6
Function for switching to the playlist entry editing (ADJUST) screen by pressing the F5 key on a connected keyboard	7
Operation improved when in Individual mode on INPUT MONITOR and REC FUNCTION screens	7
Button operation to move to first take added	9
New function in firmware version 2.20	10
Theater play function in the same take	10
New functions in firmware version 2.10	11
Cascade function support	11
cascade status added to INFORMATION screen	16
New functions in firmware version 2.00	17
Playlist function supported	17
Theater play function added	26
AUTO READY function added	27
Support for timecode synchronized playback of all takes in the current folder	28
Support for playback of WAV files in 32-bit PCM and 32-bit floating formats	28
Take list sorting functions added	28
Home Screen menu functions added	29
My MENU function added	30
mDNS (Multicast DNS) supported for easy network connection	31
Two types of VNC server compressed transmission formats supported	32
“None” added to REC FILE FORMAT menu FILE NAME setting	32
SNTP menu page now shows current date and time	32
Current folder name added to INFORMATION screen	32
Marks added automatically at buffer overflows during recording	32
Change in display when Master Clock is not locked	32
Track Names and other metadata added to BEXT chunk data of BWF files	32
iXML chunk data of Track Names and other metadata added to BWF files	32
New functions in firmware version 1.50	33
TRACK NAMES function added	33
New functions in firmware version 1.40	35
TASCAM IF-AN16/OUT analog output interface card support added	35
New functions in firmware version 1.30	37
TASCAM DA-6400 Control iPad remote control app support added	37
TASCAM IF-AE16 AES/EBU interface card support added	37
Function added to synchronize with SMPTE timecode and play the current take	38
VAMPING mode added to repeat playback function modes	39
Function added to set the input and output signal routing for each individual channel	40
On/off setting added for NO SIGNAL error checking function	42
Function added that requires pressing and holding the button to stop recording	42
New functions in firmware version 1.21	43
Support for the TASCAM IF-DA64 Dante interface card	43
Owner's Manual Addendum	43
FTP connection settings note	43
Function explanation additions and changes	43

TASCAM DA-6400 DA-6400dp Owners Manual Addendum V3.00 - Page 41

Setting output signal routing, EXIT [PEAK CLEAR], MULTI JOG, SLOT1, Option

Page 41 highlights