TASCAM DA-6400 DA-6400dp Owners Manual Addendum V3.00 - Page 39

TC RECHASE THRESHOLD

This sets the synchronization inaccuracy threshold used to

start rechasing.

Options:

1/3frame

,

1frame

,

2frame

(default),

5frame

,

10frame

Procedures for synchronized playback

1.

Make the take to use for synchronized playback the current

take.

2.

Do one of the following to start synchronized operation.

i

Press the

9

[CHASE]

button while pressing and

holding the

SHIFT

button on the front of the unit.

i

Set the

TC SYNC

page

TC CHASE MODE

item to

ON

.

If the unit was stopped when this is turned on, the unit

enters playback standby.

At this time, the

indicator on the Home Screen changes

to the

indicator and blinks. The take number display on

the Home Screen also disappears.

3.

When input timecode starts during playback standby, the

unit will automatically start playback, and the

indicator

on the Home Screen will stop blinking.

If the input timecode does not match the current take,

audio output will not be possible.

If this happens,

no take at current time

will appear

in the take name display area on the Home Screen.

If the input timecode matches the current take, its audio

will be output and the take name will appear in the take

name display area on the Home Screen.

4.

During timecode synchronized playback, press the

8

button to stop playback.

At this time, the

indicator on the Home Screen will blink.

5.

When stopped, press the

7

or

9

[CHASE]

button to start

timecode synchronized playback.

6.

Do one of the following to turn synchronized operation off.

i

Press the

9

[CHASE]

button while pressing and

holding the

SHIFT

button on the front of the unit.

i

Set the

TC SYNC

page

TC CHASE MODE

item to

OFF

.

At this time, the

indicator on the Home Screen reverts to

the

indicator.

VAMPING mode added to repeat playback function modes

VAMPING

has been added to the repeat playback function

modes.

On the

PLAY SETUP

menu page, the following three options

have been added for the

REPEAT MODE

item.

Option

Repeat icon

Meaning

OFF

(default)

Repeat playback is not used.

NORMAL

Normal repeat playback is used.

VAMPING

This is the new repeat playback

function mode added with this

update.

Operation in VAMPING REPEAT MODE

When set to this mode, the current take will be played back

repeatedly regardless of the

PLAY MODE

screen setting.

During repeat playback, press the

7

button* to automatically

move to the next take and repeat playback after playing the

current take to its end.

*

In addition to the front panel button, parallel, serial, or

network control can be used to start playback.

When this mode is active,

is added to the repeat icon on the

Home Screen.

During repeat playback, after the

7

button is pressed the

repeat icon

will blink until playback of the next take starts.

When playback of the next take starts, the

will stop blinking.

NOTE

i

If the

7

Button is pressed during playback of the final

5 seconds of the current take, the following message is

displayed, and that take will be repeated from its start to end

one more time before proceeding to play the next take.

In this case, the

will start blinking after returning to the

beginning of the take.

i

While waiting to move to the next take (when

is blinking),

operations including stopping, pausing, searching/backward,

skipping and jumping to marks will cancel moving to the

next take, and the current take will continue to repeat

playback.

In this case, the

will stop blinking.

TASCAM

DA-6400/DA-6400dp

39

DA-6400/DA-6400dp

Section	Page
New functions in firmware version 3.00	2
Time counter dimmer function added	2
Function added to show playback setting status of AUTO READY and theater play functions on the Home Screen	3
Lock function added to prevent mark setting	4
Function added to turn on/off pop-up message display when setting marks and mark setting is locked	4
ABS time display mode added	5
Entry number and time counter display and time mode switching function added to playlist entry editing (ADJUST) screen	6
Mark name that matches current time shown on playlist entry editing (ADJUST) screen	6
Function for switching to the playlist entry editing (ADJUST) screen by pressing the F5 key on a connected keyboard	7
Operation improved when in Individual mode on INPUT MONITOR and REC FUNCTION screens	7
Button operation to move to first take added	9
New function in firmware version 2.20	10
Theater play function in the same take	10
New functions in firmware version 2.10	11
Cascade function support	11
cascade status added to INFORMATION screen	16
New functions in firmware version 2.00	17
Playlist function supported	17
Theater play function added	26
AUTO READY function added	27
Support for timecode synchronized playback of all takes in the current folder	28
Support for playback of WAV files in 32-bit PCM and 32-bit floating formats	28
Take list sorting functions added	28
Home Screen menu functions added	29
My MENU function added	30
mDNS (Multicast DNS) supported for easy network connection	31
Two types of VNC server compressed transmission formats supported	32
“None” added to REC FILE FORMAT menu FILE NAME setting	32
SNTP menu page now shows current date and time	32
Current folder name added to INFORMATION screen	32
Marks added automatically at buffer overflows during recording	32
Change in display when Master Clock is not locked	32
Track Names and other metadata added to BEXT chunk data of BWF files	32
iXML chunk data of Track Names and other metadata added to BWF files	32
New functions in firmware version 1.50	33
TRACK NAMES function added	33
New functions in firmware version 1.40	35
TASCAM IF-AN16/OUT analog output interface card support added	35
New functions in firmware version 1.30	37
TASCAM DA-6400 Control iPad remote control app support added	37
TASCAM IF-AE16 AES/EBU interface card support added	37
Function added to synchronize with SMPTE timecode and play the current take	38
VAMPING mode added to repeat playback function modes	39
Function added to set the input and output signal routing for each individual channel	40
On/off setting added for NO SIGNAL error checking function	42
Function added that requires pressing and holding the button to stop recording	42
New functions in firmware version 1.21	43
Support for the TASCAM IF-DA64 Dante interface card	43
Owner's Manual Addendum	43
FTP connection settings note	43
Function explanation additions and changes	43

TASCAM DA-6400 DA-6400dp Owners Manual Addendum V3.00 - Page 39

VAMPING mode added to repeat playback function modes, Procedures for synchronized playback

Page 39 highlights