TASCAM DR-10L Owners Manual English - Page 13

Menu structure Press the MENU button to open the Menu Screen. This list provides an overview of the various menu items. Menu item Summary Setting items (default value underlined) Explanation Use to change the mic input sensitivity. 01:MIC GAIN Mic gain switch L / ML / M / H / H+ NOTE If the 04:AUTO LEVEL item on the menu screen is set to ON, it will be reset to OFF when the 01:MIC GAIN setting is changed. When this happens, AUTO LVL Cancel will appear in a pop-up message. 02:LOW CUT Low cut filter OFF / ON Turns the mic input low-cut filter on or off. The cutoff frequency is 120 Hz. 03:LIMITER Input limiter OFF / ON This function prevents distortion when signals that are too loud are input suddenly. Turns this function on or off. Distortion of sounds may occur when signals that are very loud are input even if the LIMITER function is activated. In such a case, use the Menu Screen 01:MIC GAIN item to lower the mic input sensitivity, or increase the distance from the sound source. 04:AUTO LEVEL Automatic level adjustment OFF / ON When the input sound level is too low or too high, the recording volume will be increased or decreased automatically to an appropriate level. 05:FS SAMPLE Sampling frequency 44.1kHz / 48kHz Use to set the sampling frequency setting. 06:BIT LENGTH Quantization bit depth 16bit / 24bit Use to set the quantization bit depth. 07:FILE TYPE Recording file type MONO / POLY Use to set the recording file type. MONO: Record mono files. POLY: Record stereo files (with the same data on both left and right channels). NOTE If the 08:DUAL REC item on the menu screen is set to ON, it will be reset to OFF when the 07:FILE TYPE setting is changed to POLY. When this happens, DUAL REC Cancel will appear in a pop-up message. 13 TASCAM DR-10L