TASCAM DR-10L Owners Manual English - Page 20

Specifications Ratings 88Recording media microSD card (64 MB - 2 GB) microSDHC card (4 GB - 32 GB) 88Recording/playback formats 44.1/48kHz 16/24-bit, mono/poly BWF Input/output ratings 88Analog input Mic jack Connector: 1/8" (3.5mm) mini TRS jack (with screw lock) Microphone sensitivity: -42 dBV/Pa Maximum input sound pressure: 115 dB SPL Maximum input level: -15 dBu (Gain L) Minimum input level: -55 dBu (Gain H+) Microphone input gain: 14 dB to 38dB Input impedance: 33KΩ (Mic bias off ) : 2KΩ(Mic bias on) 88Analog output Headphones jack Connector: 1/8" (3.5mm) stereo phone (dual mono audio output) Audio performance 88IN q PHONES (input monitoring output, 10kΩ load) Frequency response: 20 Hz - 22 kHz +1/−2 dB Distortion: 0.05% (1kHz sine wave, at maximum input level) S/N ratio: 88 dB or higher (PHONES volume max, MIC GAIN L selected) 20 TASCAM DR-10L General 88Power 1 AAA battery (alkaline, NiMH or lithium) USB bus power from a computer 88Power consumption 0.45 W (maximum) 88Current consumption（USB bus power) 0.25A (maximum) 88Battery operation time (continuous operation) Using an alkaline battery (EVOLTA) Format Recording 48kHz/24-bit WAV Recording 48kHz/24-bit WAV Operation time Note Mic connected Headphones not connected About 10.0 hours Mic bias: off Limiter: off Dual recording: off File type: mono Mic connected Headphones not connected Mic bias: on About 9.5 hours Limiter: off Dual recording: off File type: mono