TEAC CD-P650 CD-P650 Manual - Page 26

Troubleshooting In case of trouble with the unit, please take the time to look through this chart and see if you can solve the problem yourself before you call your dealer or TEAC service center. General No power e Check the connection to the AC power source. Check and make sure the AC source is not a switched outlet and if it is, that the button is turned on. Make sure there is power to the AC outlet by plugging in another item such as a lamp or fan. No sound. e Check the connection to the amplifier. e Check the operation of the amplifier. "Power protect" blinks on the display and CD-P650 enters the standby mode. e The power supply is unstable. After a brief interval, press the STANDBY/ON button to turn the unit on. "Over current" blinks on the display. e USB storage devices with a power consumption of over 500mA cannot be used other than when in USB mode. Disconnect the USB storage device or switch to USB mode. Remote control doesn't work. e If the batteries are exhausted, change the batteries. e Use remote control unit within the range (5m) and point it at the front panel. e Make sure that there are no obstacles between the remote control unit and the main unit. e If a fluorescent light is on near the unit, turn it off. e Set the REMOTE CONTROL SELECTOR to "SYSTEM", and connect the REMOTE CONTROL jacks of this unit and A-R650 with the remote control connection cord, if you want to operate with the remote control unit supplied with A-R650. e When you use the remote control unit supplied with A-R650, press the CD button of the remote control unit before operation. iPod Player Will not play. e Remove the iPod from the USB port, wait for a few seconds, and insert it again. e A software update may solve the problem. Visit the Apple website and download the latest iPod software. Cannot operate the iPod. e Make sure the HOLD switch of the iPod is not set to HOLD. MP3/WMA There is no sound even if the Play button (y) is pressed. e Check whether there are MP3 or WMA files on the USB. e Non-playable file formats (e.g MPEG 1 LAYER 2 file) cannot be played. "No title", "No artist", and "No album" appears on the display. e There is no ID3 tag information for the music file. Edit the title, artist, and album information of the song on a PC using the MP3 or WMA making application. Some unknown characters are displayed on the display panel. e This unit cannot display symbols or full-size or double-byte characters (such as Japanese, Chinese, etc.) correctly. File names of MP3 or WMA should be in alphanumeric characters. If normal operation cannot be recovered, unplug the power cord from the outlet and plug it in again. Maintenance If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner or alcohol as they may damage the surface of the unit. CD Player Will not play. e Load a disc with the label side facing up. e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Depending on the disc conditions, etc. it may not be possible to play back a CD-R/RW disc. Try again with another disc. e You cannot play back unfinalized CD-R/RW discs. Finalize such a disc using a CD recorder and try again. Sound skips. e Place the unit on a stable surface to avoid vibration and shock. e If the disc is dirty, clean the surface of the disc. e Do not use scratched, damaged or warped discs. 26