TEAC CD-P650 CD-P650 Manual - Page 4

Contents Before Use Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Use 4 Discs 5 MP3 and WMA 6 USB Storage Devices 6 iPod Compatibility 6 Connections 7 Part Names (main unit 8 Remote Control Unit 10 Basic Operation 11 Listening to a CD 12 Listening to a USB Storage Device 13 Listening to an iPod 14 Playback 14 Programmed Playback 17 Shuffle Playback 19 Repeat Playback 20 Display 21 Before Recording 22 Setting the Recoding Mode 23 Recording to a USB Storage Device 24 Deleting a file from a USB Storage Device 25 Restoring factory settings 25 Troubleshooting 26 Specifications 27 Read this before operation < When the unit is turned on, switching on the TV may result in lines appearing on the TV screen, depending on the condition of the electric waves of the TV broadcast. This is not a malfunction of the unit or the TV. In this case, turn off the unit. < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture. < Do not place the unit on an amplifier/receiver. < Do not open the cabinet as this might result in damage to the circuitry or an electrical shock. If a foreign object should get into the set, contact your dealer or service agency. < When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord. < Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth. < Keep this manual in a safe place for future reference. < The operations are illustrated using the European model as the example in this manual. DO NOT MOVE THE UNIT DURING PLAYBACK During playback, the disc rotates at a high speed. Do NOT lift or move the unit during playback. Doing so may damage the disc. WHEN MOVING THIS UNIT When changing the place of installation or packing the unit for moving, be sure to remove the disc and return the disc table to its original position in the player. Then, press the STANDBY/ON button to turn the standby, and disconnect the power cord. Moving this unit with a disc loaded may result in damage to this unit. 4