TP-Link AC1900 Archer C9 V2 User Guide - Page 45
Archer C9, Advanced, Network, MAC Clone, WAN MAC Address, Your PC's MAC Address, Clone MAC Address,
View all TP-Link AC1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Archer C9 AC1900 Wireless Dual Band Gigabit Router Static IP - Connections which use static IP address assignment. The router cannot detect PPTP/L2TP connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually. 5.2.2 MAC Clone Choose menu "Advanced→Network→MAC Clone", you can configure the MAC address of the WAN on the screen below, Figure 5-9. Figure 5-9 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here. WAN MAC Address - This field displays the current MAC address of the Internet port. If your ISP requires you to register the MAC address, please enter the correct MAC address into this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit). Your PC's MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address button and this MAC address will fill in the WAN MAC Address field. Click Restore Factory MAC to restore the MAC address of Internet port to the factory default value. Click the Save button to save your settings. Note: Only the PC on your LAN can use the MAC Address Clone function. 5.2.3 LAN Choose menu "Advanced→Network→LAN", you can configure the IP parameters of the LAN on the screen as below. - 34 -