TP-Link AC1900 Archer C9 V2 User Guide - Page 78
Forwarding
View all TP-Link AC1900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Archer C9 AC1900 Wireless Dual Band Gigabit Router 5.10 Forwarding Figure 5-49 NAT Boost Figure 5-50 The Forwarding menu There are four submenus under the Forwarding menu: Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function. 5.10.1 Virtual Servers Choose menu "Advanced→Forwarding→Virtual Servers", and then you can view and add virtual servers in the next screen shown in Figure 5-51. Virtual servers can be used for setting up public services on your LAN. A virtual server is defined as a service port, and all requests from Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP address because its IP address may change when using the DHCP function. If you want the Virtual Servers configuration take effect, please make sure the NAT is enabled. Figure 5-51 Virtual Servers - 67 -