TP-Link AP200 AP200US V1 User Guide - Page 8
LED Explanation, Status, Indication
View all TP-Link AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Chapter 2 LED Explanation Name (Power) (Wireless 2.4GHz) (Wireless 5GHz) (LAN) (WPS) Status Indication On System initialization completes. Blinking System initialization or firmware upgrade is in process. Do not disconnect or power off the AP device. Off Power is off. Please ensure that the power adapter is connected correctly. On The wireless 2.4GHz band is working properly (in AP/Multi-SSID/ Repeater/Bridge mode). The wireless 2.4GHz band is disabled (in AP/Multi-SSID/Repeater/ Off Bridge mode). The LED is always off (in Client mode). On The wireless 5GHz band is working properly (in AP/Multi-SSID/ Repeater/Bridge mode). The wireless 5GHz band is disabled (in AP/Multi-SSID/Repeater/ Off Bridge mode). The LED is always off (in Client mode). On A device is connected to the Ethernet port. Off No device is connected to the Ethernet port. Slow blinking WPS connection is in process. On WPS connection is successful. It will turn off after 5 minutes. Quick blinking WPS connection is failed. Solid green The signal strength is great (in Repeater/Bridge/Client mode). Solid orange The signal strength is good (in Repeater/Bridge/Client mode). Solid red The signal strength is too weak (in Repeater/Bridge/Client mode). The device is disconnected from the host network (in Repeater/ Off Bridge/Client mode). Note: After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off. 5