TP-Link Archer A10 Archer A10US V1 User Guide - Page 13
Smart Device, Computer, minutes, Method 1: Wired, Method 2: Wirelessly
View all TP-Link Archer A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 2 Connect the Hardware 4. Turn on the modem, and then wait about 2 minutes for it to restart. 5. Connect the power adapter to the router and turn on the router. 6. Verify that the following LEDs are on and solid to confirm the harware is connected correctly. Power On 2.4GHz On 5GHz On Internet On Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the Wi-Fi On/Off button on the side panel for about 2 seconds. Within a few seconds, both the LEDs shoud turn solid on. 7. Connect your computer to the router. • Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable • Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Connections are available Wireless Network Connection TP-Link_XXXX TP-Link_XXXX_5G √ Connect automatically Connect Smart Device < Settings Wi-Fi Wi-Fi CHOOSE A NETWORK... or TP-Link_XXXX TP-Link_XXXX_5G Other... 9