TP-Link Archer A10 Archer A10US V1 User Guide - Page 88
LEDs Control, 14. 11. 4. DoS Protection Settings, Network, DHCP Server, Enable DHCP Server
![]() |
View all TP-Link Archer A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Chapter 14 Manage the Router 1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. 14. 11. 3. LEDs Control The router's LEDs indicate router's activities and status. You can turn on or turn off the LEDs either from the web management page or by pressing the LED button. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Parameters. Focus on LED section. 3. Tick the Night Mode checkbox. 4. Specify a time period in the LED Off Time as needed, and the LEDs will be off during this period. 5. Click Save. 14. 11. 4. DoS Protection Settings DoS Protection can protect your home network against DoS attacks from flooding your network with server requests. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Settings to enable Dos Protection. 3. Go to Advanced > System Tools > System Parameters. 4. Enter a value between 5 and 7200 to trigger the protection immediately when the number of packets exceeds the preset threshold value. 84
![](/manual_guide/products/tplink-archer-a10-archer-a10us-v1-user-guide-4e61a86/88.png)