TP-Link Archer A10 Archer A10US V1 User Guide - Page 93
Advanced, System Tools, System Parameters, Survey, Security, Network, DHCP Server, Enable DHCP Server
![]() |
View all TP-Link Archer A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
of the root router is 192.168.0.1, the IP address of the extended router can be 192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.) 2 ) Click Save. Note: Log in to the web management page again if the IP address of the router is altered. 3. Survey the SSID to be bridged: 1 ) Go to Advanced > System Tools > System Parameters and focus on the WDS section. Enable the WDS Bridging feature. 2 ) Click Survey to scan all available networks and select the network you want to bridge. The SSID (network name) and MAC Address will be automatically populated. You can also manually fill in these parameters. 3 ) Select a Security type and enter related parameters, which should be the same as the network to be bridged. 4. Disable DHCP: 1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. 89
![](/manual_guide/products/tplink-archer-a10-archer-a10us-v1-user-guide-4e61a86/93.png)