TP-Link Archer A10 Archer A10US V1 User Guide - Page 87
WDS, AP Isolation Feature, Airtime Fairness Feature, Multi-User MIMO Feature, Advanced
![]() |
View all TP-Link Archer A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 14 Manage the Router • AP Isolation Feature - If you want to confine and restrict all wireless devices connected to the network from interacting with each other, but still able to access the internet, enable AP Isolation feature. • Airtime Fairness Feature - This feature allows you to optimize the throughput of each flow. The ATF traffic scheduler uses the per-destination airtime targets to balance airtime usage across flow destinations. • Multi-User MIMO Feature - Enable to use Multi-User MIMO Feature. Only available for 5GHz. Note: To use this feature, you need to have a network adapter that supports Multi-User MIMO. 14. 11. 2. WDS WDS (Wireless Distribution System) Bridging feature allows you to bridge a router with an access point to extend the wireless network coverage. The access point should also support WDS Bridging feature. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Parameters. Focus on WDS section. 3. Enable the WDS Bridging feature. 4. Click Survey to scan all available networks and select the network you want to bridge. The SSID (network name) and MAC Address will be automatically populated. You can also manually fill in these parameters. 5. Select a Security type and enter related parameters, which should be the same as the network to be bridged. 6. Click Save. Note: You need to enable and configure the WDS Bridging feature for the access point as well. 7. Disable DHCP: 83
![](/manual_guide/products/tplink-archer-a10-archer-a10us-v1-user-guide-4e61a86/87.png)