TP-Link Archer C60 Archer C60EU V1 User Guide - Page 20
Set Up an IPv6 Internet Connection, types: PPPoE, Dynamic IPSLAAC/DHCPv6, Static IP, 6to4 tunnel
View all TP-Link Archer C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 4 Set Up Internet Connection 4. 3. Set Up an IPv6 Internet Connection Your ISP provides information about one of the following IPv6 Internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge). 1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. 2. Go to Advanced > IPv6. Select the Internet connection type provided by your ISP. Tips: If you do not know what your Internet connection type is, contact your ISP or judge according to the already known information provided by your ISP. 3. Fill in information as required by different connection types. Red blanks must be filled in. 1 ) Static IP: Fill in blanks and click Save. 17
17
Chapter 4
Set Up Internet Connection
4. 3.
Set Up an IPv6 Internet Connection
Your ISP provides information about one of the following IPv6 Internet connection
types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel,
Pass-Through (Bridge).
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Advanced
>
IPv6
. Select the Internet connection type provided by your ISP.
Tips:
If you do not know what your Internet connection type is, contact your ISP or judge according to the already known
information provided by your ISP.
3.
Fill in information as required by different connection types. Red blanks must be
filled in.
1 )
Static IP:
Fill in blanks and click
Save
.