TP-Link Archer C60 Archer C60EU V1 User Guide - Page 85

Enter 8.8.8.8 as Primary DNS, click, As the picture below shows, if the IP Address is 0.0.0.0

Get TP-Link Archer C60 PDF manuals and user guides View all TP-Link Archer C60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

• Your computer might not recognize any DNS server addresses, please manually configure DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 as Primary DNS, click Save. Tips: 8.8.8.8 is a safe and public DNS server operated by Google. • Power cycle the modem and the TP-LINK router. 1 ) Power off your modem and TP-LINK router, leave them off for 1 minute. 2 ) Power on your modem first, wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power back TP-LINK router. 4 ) Wait another 1 or 2 minutes and check the Internet access. • Reset the router to factory default settings and reconfigure the router. • Upgrade the firmware of the router. • Check the TCP/IP settings on the particular device if all other devices can get Internet from the router. As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below and try again: 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
82
• Your computer might not recognize any DNS server addresses, please manually
configure DNS server.
1 ) Go to
Advanced
>
Network
>
DHCP Server
.
2 )
Enter 8.8.8.8 as Primary DNS, click
Save
.
Tips:
8.8.8.8 is a safe and public DNS server operated by Google.
• Power cycle the modem and the TP-LINK router.
1 )
Power off your modem and TP-LINK router, leave them off for 1 minute.
2 )
Power on your modem first, wait about 2 minutes until it gets a solid cable or
Internet light.
3 )
Power back TP-LINK router.
4 )
Wait another 1 or 2 minutes and check the Internet access.
• Reset the router to factory default settings and reconfigure the router.
• Upgrade the firmware of the router.
• Check the TCP/IP settings on the particular device if all other devices can get Internet
from the router.
As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below
and try again: