TP-Link Archer CR700 Archer CR700 (US) V1 User Guide - Page 14
The Back Panel, Archer CR700, RESET, Method one, WiFi ON/OFF, USB2, LAN4, Cable, Power ON/OFF - factory reset
View all TP-Link Archer CR700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 1.3.2 The Back Panel Figure 1-2 RESET: There are two ways to reset the modem router's factory defaults. Method one: With the modem router powered on, use a pin to press and hold the Reset button for at least 8-10 seconds. And the modem router will reboot to its factory default settings. Method two: Restore the default setting from "5.10.6 Backup & Restore" of the modem router's Web-based Management. WPS: The switch for the WPS function. WiFi ON/OFF: The switch for the WiFi function. Press it to enable/disable the WiFi function. USB2, USB1: The USB port connects to a USB storage device or a USB printer. LAN4, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to your PC or the other Ethernet network devices. Cable : Through this port, you can connect the modem router to coaxial cable. DC: The power plug where you will connect the power adapter. Power ON/OFF: The switch for the power. 6