TP-Link Archer CR700 Archer CR700 (US) V1 User Guide - Page 49
Use the WPS Button, Push Button Recommended - setup
View all TP-Link Archer CR700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide You cannot connect other device to this modem router by entering the router's PIN on your client device if you haven't switch on Enable Router's PIN. WPS Wizard: Enable WPS - The switch for the WPS. If you turn on this button, the field will become green and you can add a new wireless device to an existing network quickly by WPS (also called QSS) function. Select a setup method - You can select either of Push Button (Recommended) or PIN Number as the WPS setup method. Push Button (Recommended) - When you select this method, you can add a new device by pressing the physical button on the router or by clicking the software push Connect button on this screen. PIN Number - When you select this method, you can add a new device by entering the client's PIN in the field and then click Connect button. To add a new device: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and modem router using either Push Button method or PIN Number method. Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. I. Use the WPS Button Use this method if your client device has a Wi-Fi Protected Setup (WPS) button. Step 1: Press the physical button on the router (as shown in Figure 5-16) or click the software push button: Connect (as shown in Figure 5-17). 41