TP-Link EAP110-Outdoor EAP110-OutdoorEU V1 Installation Guide - Page 10
Option 1: Pole Mounting
 |
View all TP-Link EAP110-Outdoor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Option 1: Pole Mounting Step 1: Loosen and completely remove the end of the metal strap by turning the captive screw counterclockwise with a flathead screwdriver. Step 2: Lead the end of the metal strap through the back of the EAP. Step 3: Position the EAP and wrap the metal strap around the pole. Feed the end back through the screw-block and turn the screw clockwise to tighten the metal strap using a flathead screwdriver until the EAP is secure. Step 4: Connect the antennas to the EAP. 7
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
 |
 |
7
Option 1: Pole Mounting
Loosen and completely remove the
end of the metal strap by turning the
captive screw counterclockwise
with a flathead screwdriver.
Step 1:
Lead the end of the metal strap
through the back of the EAP.
Step 2:
Position the EAP and wrap the metal
strap around the pole. Feed the end
back through the screw-block and
turn the screw clockwise to tighten
the metal strap using a flathead
screwdriver until the EAP is secure.
Step 3:
Connect the antennas to the EAP.
Step 4: