TP-Link EAP110-Outdoor EAP110-OutdoorEU V1 Installation Guide - Page 6
SYS LED Explanation, Passive PoE Adapter - firmware
 |
View all TP-Link EAP110-Outdoor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
SYS LED Explanation LED Status Flashes green, red and yellow before remaining green Flashes green twice Solid green Flashes red Flashes yellow Double flashes red, green, yellow Indication The device is initializing. Initialization is completed. The device is working properly . System errors. RAM, Flash, Ethernet, WLAN or firmware may be malfunctioning. Firmware update is in progress. Do not disconnect or power off the device. The device is being reset to its factory default settings. Passive PoE Adapter Remote Reset: Press and hold for 8 seconds to reset the EAP to its factory default settings. Power LED: The Power LED indicates the status of the electric current: On: Supplying power. Off: Not supplying power. 3
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
 |
 |
SYS LED Explanation
LED Status
Indication
Passive PoE Adapter
3
Remote Reset:
Press and hold for 8 seconds
to reset the EAP to its factory
default settings.
Flashes green, red
and yellow before
remaining green
The device is initializing.
Solid green
The device is working properly .
Flashes red
System errors. RAM, Flash, Ethernet, WLAN or
firmware may be malfunctioning.
Flashes yellow
Firmware update is in progress. Do not disconnect
or power off the device.
Double
flashes
red,
green, yellow
The device is being reset to its factory default
settings.
Flashes green twice
Initialization is completed.
Power LED:
The Power LED indicates the
status of the electric current:
On:
Supplying power.
Off:
Not supplying power.