TP-Link EAP110 EAP Controller Software V2 User Guide - Page 62
Load Balance
View all TP-Link EAP110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Select the Channel used by the EAP device to improve wireless performance. The range of available channels is determined by the radio mode and the country setting. If you select Auto for the channel setting, the EAP device scans available channels and selects a channel where the least amount of traffic is detected. Select the TX Power (transmit power) in the 4 options: Low, Medium, High and Custom. Low, Medium and High is defined according to the Max TxPower (maximum transmit power. It may vary among different countries and regions). Low: Max TxPower * 20%, round to integer. Medium: Max TxPower * 60%, round to integer. High : Max TxPower Custom: Enter a value manually. 5.4.4 Load Balance By restricting the maximum number of clients accessing the EAPs, Load Balance helps to achieve rational use of network resources. Select the frequency band (2.4GHz/5GHz). Load Balance: If this function is enabled, you can specify the maximum number of connected clients. While more clients want to connect, the EAP will begin to check those with lower signals and disconnect them. 58