TP-Link EAP115 EAP Controller 2.4.X User Guide - Page 67
Trunk Settings
View all TP-Link EAP115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. Check the box to enable the feature. 4. You can join the overridden SSID in to a VLAN. Check the Use VLAN ID box and specify a VLAN ID. 5. Specify a new name and password for the SSID. 6. Click Apply to save the configuration. Trunk Settings Only the EAP330 supports trunk function. The trunk function can bundles multiple Ethernet links into a logical link to increase bandwidth and improve network reliability. Status Mode Enable this function. The EAP330 has two 1000Mbps Ethernet ports. If the Trunk function is enabled and the ports are in the speed of 1000Mbps Full Duplex, the whole bandwidth of the trunk link is up to 4Gbps (2000Mbps * 2). Select the applied mode of Trunk Arithmetic. • SRC MAC + DST MAC: When this option is selected, the arithmetic will be based on the source and destination MAC addresses of the packets. • DST MAC: When this option is selected, the arithmetic will be based on the destination MAC addresses of the packets. • SRC MAC: When this option is selected, the arithmetic will be based on the source MAC addresses of the packets. 62