TP-Link N300 User Guide - Page 80

77

5°

If you still cannot access the Internet, please restore your modem router to its

factory default settings and reconfigure your modem router by following the

instructions in

Use Quick Setup Wizard

.

6°

Please contact our Technical Support if the problem still exists.

T5° How to configure MAC Clone?

You can manually change the MAC address of the modem router. It is helpful when your

Internet access account provided by your ISP is bound to one specific MAC address,

in other words, your ISP just permits only one computer with the authenticated MAC

address to access the Internet. In this case, you can use MAC Clone to allow more

computers to access the Internet via the same account.

1°

Visit

http://tplinkmodem.net

, and log in with password you set for the modem router.

2°

Go to

Advanced

>

Network

>

Internet

page. Click the

Add

icon, and scroll down to

get the

MAC Clone

section.

•

If you are using the computer with the authenticated MAC address to access

the modem router, please select

Use Current Computer MAC Address

.

•

If you know the authenticated MAC address, please select

Use Custom MAC

Address

and then enter the address.

3°

Click

OK

to make the settings effective.

T6° What can I do if I cannot find my wireless network or I cannot connect

the wireless network?

¾

If you fail to find any wireless network, follow the steps below:

1°

Make sure the wireless function is enabled if you’re using a laptop with built-in

wireless adapter. You can refer to the relevant document or contact the laptop

manufacturer.

2°

Make sure the wireless adapter driver is installed successfully and the wireless

adapter is enabled. You can refer to the relevant document or contact the wireless

adapter manufacturer.

Section	Page
About This Guide	4
Get to Know Your Modem Router	5
1. 1. Product Overview	6
1. 2. Product Appearance	6
Connect the Hardware	9
2. 1. Position Your Modem Router	10
2. 2. Connect Your Modem Router	10
Log in to Your Modem Router	12
Set Up Internet Connections	14
4. 1. Use Quick Setup Wizard	15
4. 2. Manually Set Up an Internet Connection	15
4. 3. Test Internet Connectivity	16
4. 4. Set Up an IPv6 Connection	16
4. 5. Wireless Router Mode	17
Bandwidth Control	19
Network Security	23
6. 1. MAC Filtering	24
6. 2. Access Control	25
6. 3. IP & MAC Binding	27
IPTV	29
Parental Controls	31
Guest Network	35
9. 1. Create a Network for Guests	36
9. 2. Customize Guest Network Options	36
NAT Forwarding	38
10. 1. Share Local Resources in the Internet by Virtual Server	39
10. 2. Open Ports Dynamically by Port Triggering	40
10. 3. Free Applications from Port Restriction by DMZ	41
10. 4. Make Xbox Online Games Run Smoothly by UPnP	42
Specify Your Network Settings	44
11. 1. LAN Settings	45
11. 1. 1. Change the LAN IP Address	45
11. 1. 2. Use the Modem Router as a DHCP Server	46
11. 1. 3. Reserve LAN IP Addresses	47
11. 2. IPv6 LAN Settings	47
11. 2. 1. Configure the RADVD Address Type	48
11. 2. 2. Configure the DHCPv6 Server Address Type	48
11. 3. Wireless Settings	49
11. 3. 1. Specify Basic Wireless Settings	49
11. 3. 2. Use WPS for Wireless Connection	51
11. 3. 3. Schedule Your Wireless Function	52
11. 3. 4. View Wireless Information	53
11. 3. 5. Advanced Wireless Settings	54
11. 4. Set Up a Dynamic DNS Service Account	56
11. 5. Interface Grouping	56
11. 6. Create Static Routes	58
11. 7. Set up a VPN Connection	60
11. 8. Set Up the IPv6 Tunnel	64
11. 8. 1. Use the Public IPv6 Tunnel Service-6to4	64
11. 8. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP	65
Administrate Your Network	66
12. 1. Set System Time	67
12. 2. Update the Firmware	68
12. 3. Back up and Restore Configuration Settings	68
12. 4. Change the Administrator Account	69
12. 5. Local Management	70
12. 6. Remote Management	70
12. 7. System Log	71
12. 8. Monitor the Internet Traffic Statistics	73
12. 9. CWMP Settings	73
12. 10. SNMP Settings	75

TP-Link N300 User Guide - Page 80

T5° How to con MAC Clone? - drivers

Page 80 highlights