TP-Link T3700G-52TQ T3700G-52TQUN V1 User Guide - Page 140
→STP Config→STP Config
View all TP-Link T3700G-52TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
5 Configure switch C as On Spanning Tree→MSTP Instance→Instance Config page, the designated bridge of configure the priority of Instance 1 to be 4096. Instance 1 6 Configure switch C as On Spanning Tree→MSTP Instance→Instance Config page, the root bridge of configure the priority of Switch C in Instance 2 as 0. Instance 2 Configure switch D: Step Operation Description 1 Configure ports On VLAN→802.1Q VLAN page, configure the link type of the related ports as Trunk, and add the ports to VLAN101-VLAN106. The detailed instructions can be found in the section 802.1Q VLAN. 2 Enable STP function On Spanning Tree→STP Config→STP Config page, enable STP function and select MSTP version. On Spanning Tree→Port Config→Port Config page, enable MSTP function for the port. 3 Configure the region On Spanning Tree→MSTP Instance→Region Config page, name and the revision of configure the region as TP-Link and keep the default revision MST region setting. 4 Configure On Spanning Tree→MSTP Instance→Instance Config page, VLAN-Instance mapping configure VLAN-Instance mapping table. Map VLAN 101, table of the MST region 103 and 105 to Instance 1; map VLAN 102, 104 and 106 to Instance 2. The configuration procedure for switch E and F is the same with that for switch D. The topology diagram of the two instances after the topology is stable For Instance 1 (VLAN 101, 103 and 105), the red paths in the following figure are connected links; the gray paths are the blocked links. 127