TP-Link TD-8840 User Guide - Page 11
Hardware Installation Guide, 2.1 System Requirement, 2.2 The Front Panel - bridge
UPC - 845973060176
View all TP-Link TD-8840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TD-8840 ADSL2+ Modem Router User Guide Chapter 2. Hardware Installation Guide The TD-8840 maintains five separate interfaces: four Ethernet and one ADSL interface. The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location where it can be safely connected to the various devices. The electrical outlet shall be installed near the device and shall be easily accessible. 2.1 System Requirement Confirm your computer has been installed with networking interface card (NIC) before connecting ADSL2+ Modem Router to your computer, with the operating system supporting the TCP/IP protocol. 2.2 The Front Panel The front panel of ADSL2+ Modem Router includes one power indicator and seven function indicators, as explained in chart below. LED Explanation Name Power ADSL Internet 1~4 (LAN) Status On Off On Flash Off On Flash Off On Off Indication Power is on. Power is off. The LINE port is linked up. The ADSL negotiation is in progress. The LINE port is linked down. A successful PPP connection has been built. Data is being transferred over the Internet. There is no successful PPP connection or the Router works on Bridge mode. There is a successful connection on the corresponding 1~4 (LAN) port but no activity. There is no connection on the corresponding 1~4 (LAN) port or the connection is abnormal. Flash Data is being transferred over the 1~4 (LAN) port. 5