TP-Link TD-8840 User Guide - Page 32

Use Static IP Address, PPP IP extension - router address

Get TP-Link TD-8840 PDF manuals and user guides
UPC - 845973060176
View all TP-Link TD-8840 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

TD-8840 ADSL2+ Modem Router User Guide Figure 4-9 ¾ PPP Username: Enter your username for your PPPoE connection to identify and verify your account to the ISP. ¾ PPP Password: Enter your password for your PPPoE connection. ¾ PPPoE Service Name: Enter a name for the PPPoE connection for recognition. ¾ Authentication Method: Choose a method of authentication, AUTO, PAP, CHAP, or MSCHAP. ¾ MTU: The default MTU value is 1480 Bytes. It is not recommended that you change the default value unless required by your ISP. The value should be between 512 and 1500. ¾ Dial on demand: If you check this box, the Internet connection can be terminated automatically after a specified inactivity period (Inactivity Timeout) and be re-established when you attempt to access the Internet again. The default value of Inactivity Timeout is 15. The value should be between 1 and 4320. ¾ PPP IP extension: If this box is checked, the IP address obtained by the Router will be assigned to the computer, and the NAT and Firewall will be disabled. ¾ Use Static IP Address: Check this box to use the static IP address to dial. The default value is disabled. ¾ Enable PPP Debug Mode: Check this box to enable the debug mode. The default value is disabled. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
TD-8840
ADSL2+ Modem Router User Guide
26
Figure 4-9
¾
PPP Username:
Enter your username for your PPPoE connection to identify and verify your
account to the ISP.
¾
PPP Password:
Enter your password for your PPPoE connection.
¾
PPPoE Service Name:
Enter a name for the PPPoE connection for recognition.
¾
Authentication Method:
Choose a method of authentication,
AUTO
,
PAP
,
CHAP
, or
MSCHAP
.
¾
MTU:
The default
MTU
value is 1480 Bytes. It is not recommended that you change the
default value unless required by your ISP. The value should be between 512 and 1500.
¾
Dial on demand:
If you check this box, the Internet connection can be terminated
automatically after a specified inactivity period (
Inactivity Timeout
) and be re-established
when you attempt to access the Internet again. The default value of
Inactivity Timeout
is 15.
The value should be between 1 and 4320.
¾
PPP IP extension:
If this box is checked, the IP address obtained by the Router will be
assigned to the computer, and the NAT and Firewall will be disabled.
¾
Use Static IP Address:
Check this box to use the static IP address to dial. The default value
is disabled.
¾
Enable PPP Debug Mode:
Check this box to enable the debug mode. The default value is
disabled.