TP-Link TD-8840 User Guide - Page 34
Obtain DNS server addresses automatically, Use the following default gateway - ip address
UPC - 845973060176
View all TP-Link TD-8840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TD-8840 ADSL2+ Modem Router User Guide Figure 4-12 ¾ Obtain an IP address automatically: Check this radio button to obtain the IP address automatically. This is not recommended by default. ¾ Use the following IP address: This radio button is checked by default. Enter the information provided by your ISP to configure the WAN IP settings. ¾ Obtain default gateway automatically: This radio button is checked by default. It's recommended that you keep the default settings to allow the Router to obtain the default gateway automatically. ¾ Use the following default gateway: Check this radio button then you can enter the IP address and the WAN interface for the default gateway. This is not recommended by default. ¾ Obtain DNS server addresses automatically: This radio button is checked by default. It's recommended that you keep the default settings to allow the Router to obtain the default DNS server addresses automatically. ¾ Use the following DNS server addresses: Check this radio button then you can enter the primary DNS server and secondary DNS server. This is not recommended by default. ) Note: 1. DHCP can be enabled for PVC in MER mode as WAN interface if "Obtain an IP address automatically" is chosen. 2. Changing the default gateway or the DNS will affect the whole system. Configuring them with static values will disable the automatic assignment from DHCP or other WAN connection. 3. If you configure static default gateway over this PVC in MER mode, you must enter the IP address of the remote gateway in the "Use IP address". The "Use WAN interface" is optional. 28