TP-Link TD-8840 User Guide - Page 56
IP Address, 4.5.4.3. Password, button in to go to - default password
![]() |
UPC - 845973060176
View all TP-Link TD-8840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
TD-8840 ADSL2+ Modem Router User Guide 4.5.4.2. IP Address Choose "Access Control→IP Address" menu, and can view and configure the IP address access control in the screen as shown in Figure 4-50. If enabled, only PCs with IP addresses listed are allowed to access the Router. Figure 4-50 To add a new entry, follow the steps below. 1. Click the Add button in Figure 4-50 to go to the Access Control page in the screen as shown in Figure 4-51. 2. Enter the IP address (e.g. 192.168.1.23) you want to add in the IP Address filed. 3. Click Save/Apply to save your configuration. Figure 4-51 4.5.4.3. Password Choose "Access Control→Password" menu, and you can change the factory default password 50
![](/manual_guide/products/tplink-td8840-user-guide-66571c8/56.png)
TD-8840
ADSL2+ Modem Router User Guide
50
4.5.4.2. IP Address
Choose “
Access Control
→
IP Address
” menu, and can view and configure the IP address
access control in the screen as shown in Figure 4-50. If enabled, only PCs with IP addresses
listed are allowed to access the Router.
Figure 4-50
To add a new entry, follow the steps below.
1.
Click the
Add
button in Figure 4-50 to go to the
Access Control
page in the screen as shown
in Figure 4-51.
2.
Enter the IP address (e.g. 192.168.1.23) you want to add in the IP Address filed.
3.
Click
Save/Apply
to save your configuration.
Figure 4-51
4.5.4.3. Password
Choose “
Access Control
→
Password
” menu, and you can change the factory default password