TP-Link TD-W9960 TD-W9960EU V1 User Guide - Page 71
Create Static Routes, I want
View all TP-Link TD-W9960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 13 Specify Your Network Settings 2. Go to Advanced > Network > Interface Grouping to open the configuration page where some interfaces can be grouped together. Click Add to create a group. Done! 3. Name the group. 4. Check the boxes of LAN1 and LAN3 in Available LAN. Here Wi-Fi 2.4G network is viewed as a LAN interface. 5. Click Enable Group Isolation to isolate working devices and disallow other devices from communicating with them. 6. Click OK to save the settings. Now your working devices connected to LAN1 and LAN3 are in an isolated group! Note: VLAN function is enabled by default. You cannot disable it when IPTV is enabled. 13. 6. Create Static Routes A static route is a pre-determined path that network information must travel to reach a specific host or network. Data from one point to another will always follow the same path regardless of other considerations. Normal internet usage does not require this setting to be configured. I want to: Visit multiple networks and multiple servers at the same time. For example, in a small office, my PC can surf the internet, but I also want to visit my company's server. Now I have a switch and another router. I connect the devices as shown in the following figure so that the physical connection between my PC and my 67